Open Contact Form

Need more information or get in touch with our team ? To serve you better, fill the form. It's quick and easy.

Tag Archives: oil cleaning

How To Operate Transformer Oil Regenerate machine?

This is YELOCO series YH-ZYD-R-30(1800Liters/Hour) Double-stage vacuum Transformer Oil Regeneration and Oil Purifier machine

YELOCO series YH-ZYD-R-30(1800Liters/Hour) Double-stage vacuum Transformer oil regeneration machine can bring benefits to you as below:

It keeps the KV of your oil above the required level.
Removes explosive gas from the oil.
Removes moisture and impurities from oil thoroughly.
Removes acidity, sludge, free carbon, other soluble oil decay products and discoloration.
It increases the life of not only the transformer but also the oil.
Have the function of Dehydration for Transformer oil.
It can vacuum pump for the Transformer and vacuum filling oil for the power transformer.
The series YH-ZYD-R system not only provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, free carbon, other soluble oil decay products and discoloration. This is accomplished by the use of high vacuum degasification technology and regeneration filters combined with our special brand of earth. After treating, the oil can be reused as new.

The series YH-ZYD-R-30(1800Liters/Hour) Double-stage vacuum Transformer Oil Regeneration and Oil Purifier machine operation is very simple. Please see below:

USAGE AND OPERATION

* Place the equipment on the horizontal ground smoothly

* Connect power cables

* Fasten all wiring terminals in the electric control cabinet

* Connect the inlet and the outlet of the oil pipe, open oil inlet valve and oil outlet valve

Automatic operation of products

* Start up procedure

Turn the “Automatic/ Manual” knob switch to the “Automatic” position and press the “Start” button switch. Under the control of the programmable logic controller PLC, the equipment will orderly control various motors, heaters, AC contactor and other components.

* Shut down procedure

In the automatic operation state, press the “Stop” button directly, and the equipment will stop working orderly under the control of programmable logic controller PLC.

* Regeneration Device Operation

If you need use Regeneration device, please open Switching valve V5.5, V5.6 first, then Close Switching valve 5.8.

If you no need use Regeneration device, please open Switching valve 5.8 first, then Close Switching valve V5.5 and V5.6.

Please open the below link and watch series YH-ZYD-R-30(1800Liters/Hour) Double-stage vacuum Transformer Oil Regeneration and Oil Purifier machine operation videos for your reference.

https://yeloco.wistia.com/projects/28kylc3p3s

If you have any interesting, please contact us now email: sales@yeloco.com, website: www.yeloco.com.

Inquiry Now

How to operate the YELOCO Double-stage vacuum Transformer oil Regeneration machine?

September 17, 2019Double-stage vacuum Transformer oil regeneration machineoil regeneration oil filtering transformer oil filtering oil filtration oil cleaning oil purification transformer oil regeneration oil purifier insulation oil purification Transformer oil filtration insulation oil filtration Transformer oil purifier transformer oil treatment Transformer oil purification insulation oil regeneration transformer oil recycling insulation oil purifiervfadmin

I. What is the FUNCTION of the YELOCO Series YH-ZYD-R Double-stage vacuum Transformer oil Regeneration machine?

Series YH-ZYD-R Double-stage vacuum Transformer Oil Regeneration Machine is special for Regeneration and purification:

1) Transformer oil

2) Insulating oil

3) Cable oil

4) Silicone oil

5) Dielectric oil

6) Mutual Inductor oil

7) Switch oil

8) Natural ester fluid

The YH-ZYD-R Double-stage vacuum Transformer Oil Regeneration Machine not only provides regular oil purification such as degassing, drying and particulate removal but also can remove acidity, sludge, free carbon, other soluble oil decay products, and discoloration. This is accomplished by the use of high vacuum degasification technology and regeneration filters combined with our special brand of earth. After treating, the oil can be reused as new.

It is used for regeneration of very inferior insulating oil, reduce dielectric loss, remove acid, recovery the color.

II. Why need YELOCO Series YH-ZYD-R Double-stage vacuum Transformer oil Regeneration machine?

Series YH-ZYD-R Double-stage Vacuum Insulation Oil Regeneration system can make oil color significantly improved. No.6 10 dark-colored oil can be retrofitted to the color of No.2 4 oil.
Series YH-ZYD-R Double-stage Vacuum Insulation Oil Regeneration and oil filtration systems can recover aging insulating oil electrical characteristics PH value ≥5.5, Acid value ≤0.03 mg Koh/g, Dielectric Loss Factors tgδ (90℃) % ≤0.001, let oil specification back to new oil.
The treated oil neither damages the basic composition and antioxidant properties of the oil but also meets the new oil standard. At the same time, it improves the insulation and safety performance of the equipment, and the cost is 90% lower than the traditional oil change method.

III. How to operate the YELOCO Series YH-ZYD-R Double-stage vacuum Transformer oil Regeneration machine?

Video link:

https://yeloco.wistia.com/projects/c1ll00v8cx

Please open the link and watch this machine operation videos. If you have any interesting, please contact us now. Email: sales@yeloco.com. Whatsapp: 0086 13647641182

Inquiry Now

What is Function of YELOCO Series YH-ZYD-AI Automatic type Intelligent Transformer Oil Purification machine?

October 31, 2019Double-stage vacuum Transformer oil filtration machinetransformer oil regeneration oil purification insulation oil purification oil purifier insulation oil filtration Transformer oil filtration oil precoessing Transformer oil purifier insulating oil purifier Transformer oil purification insulating oil purification insulation oil purifier insulating oil filtration oil recycling oil regeneration oil filtering oil cleaning oil filtrationvfadmin

YELOCO Series YH-ZYD-AI Automatic type Intelligent Transformer Oil Purification machine

Application:

Series YH-ZYD-AI Automatic type Intelligent Double-stage vacuum Transformer Oil Purifier Machine is special for purification:

Transformer oil
Insulating oil
Cable oil
Silicone oil
Dielectric oil
Mutual Inductor oil
Switch oil

Comparing with the single-stage type, this machine adopts the double stages vacuum system, which can improve the machine working vacuum value highly, so it can remove the water, gas, and impurities in transformer oil high-efficiently, increasing and maintain the oil’s dielectric strength and quality of oil, make sure the electric device running safely. It is mainly used for purifying the insulating oil in all kinds of large power equipment which are above110KV.

Meanwhile, as the bridge-type vacuum linking system, Series YH-ZYD-A oil purifier can be used as an independent vacuum source with functions of vacuum dehydration, vacuum filling oil for Power Transformers.

Features:

Series YH-ZYD-AI Automatic type Intelligent Double-stage vacuum Transformer Oil Filtration Machine equipped with advanced sensors, controllers actuators, cloud network module, and other devices, intelligent Transformer oil purification machine will exchange professional oil processing technology by internet, which will ultimately achieve unattended and remote operation.
Intelligent filtering: According to the professional process requirements, it can automatically identify the change of the oil during the processing and stop automatically after passing the inspection. The machine removes the redundant process and meets the environmental protection requirements for energy saving and emission reduction.
Internet+: Through the cloud platform for real-time exchange of process parameters to achieve remote operations.
Remote Diagnosis: Through the cloud platform, to achieve a remote diagnosis and reduce travel cost.
SMS Warning: Through the cloud platform, the status and information of the device will be reported to special mobile phone users.
Remote Monitoring: Through the cloud platform, we can monitor the process of equipment in the office and know the process.

If you have any interesting, please contact us now. Email: sales@yeloco.com, Whatsapp: 0086 13647641182.

Inquiry Now

What is difference between hydraulic oil and turbine oil?

June 11, 2019Turbine oil purifier machine Lube oil filter / Hydraulic oil filterlubricating oil purifier oil regeneration lubricating oil filtration oil filtering oil cleaning oil filtration turbine oil purifier oil purification turbine oil purification oil treatment turbine oil filtration oil purifier turbine oil filtering hydraulic oil purifier hydraulic oil purification hydraulic oil filtering hydraulic oil filtration lubricating oil purification lube oil oil recyclingvfadmin

I. First of all, let’s talk about the difference between the definition of hydraulic oil and turbine oil.

The definition of hydraulic oil is: hydraulic oil uses the pressure of the liquid to make the hydraulic system as the hydraulic medium, which acts as anti-wear, system lubrication, defensive cooling, rust prevention, etc. for the hydraulic system.

The definition of Turbine oil is: Turbine oil is commonly referred to as turbine oil, including gas turbine oil, steam turbine oil, etc., which are commonly used in the reduction gears, sliding bearings, and hydraulic control systems of the connected units. The main functions of turbine oil are cooling, speed regulation and lubrication.

II. The differences between hydraulic oil and turbine oil performance requirements

Performance requirements for hydraulic oil: Hydraulic oil requires excellent cleanliness. In order to maintain or improve the efficiency of the hydraulic system, extending the life of the hydraulic oil can save some maintenance costs, has a good anti-wear property is the advantage of turbine oil and hydraulic oil.

Performance requirements for turbine oil: Turbine oil must have good rust and corrosion resistance, good anti-foaming and air release, good demulsibility, good stability, and suitable viscosity.

III. The differences between hydraulic oil and turbine oil characteristics

Characteristics of turbine oil: Gas turbine has the characteristics of energy saving and power. During operation, the lubricating oil is subjected to high heat surface, mixed with air (flue gas), pumped and circulated at a considerable rate and used under high pressure. Therefore, gas turbine oil is required to have superior high temperature oxidation stability and wear resistance than steam turbine oil.

Characteristics of hydraulic oil: Hydraulic oil is used as the working medium of the hydraulic system. It mainly transmits hydraulic energy while lubricating the hydraulic components.
Turbine oil generally refers to gas turbine oil and hydraulic turbine oil. Hydraulic oil is used in hydraulic transmission systems. The two environments are different. Turbine oil requires higher rust prevention, anti-foam and anti-emulsification requirements. Hydraulic oil has higher requirements for anti-wear, anti-foam and anti-emulsification

So our company have designed a special series YH-TY Turbine oil purification machine and series YH-TYA Lubricating oil purification machine according to the different characteristics of the oil.

If you have any interesting, please contact us now. Email: sales@yeloco.com, whatsapp: 0086 13647641182.